Snapper 5901208 Benutzerhandbuch

www.SnapperPro.com

Operation

See Figure 2.  The seat can be adjusted forward and 
backward.  Move the lever towards the left, position 
the seat as desired, and release the lever to lock the 
seat into position.

Tire pressure should be checked periodically, and 
maintained at the levels shown in the chart. Note 
that these pressures may differ slightly from the “Max 
Inflation” stamped on the side-wall of the tires. The 
pressures shown provide proper traction, improve cut 
quality, and extend tire life.

The cutting height adjustment pin (A, Figure 3) control 
the mower cutting height.  The cutting height is 
adjustable between 1-3/4” (4,4 cm) and 5” (12,7 cm) 
in 1/4” (0,64 cm) increments.

 1.  Depress the deck lift foot pedal (B) until it locks 

into the 5” (12,7 cm) position.

 2.  Place the cutting height adjustment pin in the 

desired cutting height.

 3.  Depress the deck lift foot pedal then push the lock 

lever (C) toward the right to release the lock.

 4.  Release the deck lift foot pedal until it comes to 

rest against the cutting height adjustment pin.

Rear

15

1,03 All

Front

25

1,72 Models with pneumatic tires

Front

N/A

Models with flat free tires

Not 

for  

Reproduction