Woods Equipment CZR2242B Benutzerhandbuch

18

- The keyswitch has three 

positions:  OFF, RUN, and START.  Insert the key 
and turn it clockwise to move the switch from OFF to 
RUN.  Turn it further to START and hold to engage 
the starter.  Release the key and the switch will return 
to RUN from START.  Turn the key counterclockwise 
to OFF to stop the engine.

 - Move the throttle lever forward to 

increase engine speed until the maximum governed 
engine RPM is reached.  Move the lever rearward to 
decrease engine speed until the engine reaches its 
idle speed.

Pull the choke control out to set the choke ON.  Push 
it in to set the choke OFF.

POWER TAKE OFF (PTO) SWITCH (P)

 - 

The operator must be in the seat when engaging the 
PTO or the engine will kill.  Pulling the PTO switch 
out engages (turns on) the PTO and starts the blades 
or other attachment.  Pushing the PTO switch in 
disengages (turns off) the PTO and stops the blades 
or other attachment.  

NOTE:  The PTO switch does not control 
attachments powered by a separate engine.

-

 

Disengage the PTO whenever you stop or leave 
the operator’s position

-

 

Shut off engine with the key and remove the 
spark plug wires before making adjustments or 
unplugging a clogged mower.

-

 

Do not engage the PTO until ready to start 
mowing.

 - Records accumulated time 

the machine is in operation and provides service 
alerts.  Push and release MODE button to toggle 
between functions.  Provided service alerts include 

change engine oil and filter, change hydraulic oil, 

and service air filter.  When the service time is 

approaching, an alert message will flash temporarily, 
interrupting whatever mode the meter is in.  This 
will continue until the alert is reset.  When the 
service interval reaches "0" hours, the word "NOW" 
replaces the hours remaining.  To reset the service 
alert, depress and hold down the mode button for 6 
seconds while in the alert to be cleared.