Woods Equipment CZR2242B Benutzerhandbuch

7

- 

Check operator presence interlock system and 
brake operation.  Adjust or repair any problems 
before using. 

- 

Do not tamper with or defeat safety devices. 
Keep guards, shields and interlock safety devices 
in place and in proper working condition.  They 
are for your protection.

- 

Keep all fasteners such as nuts, bolts and pins 
well secured. 

- 

Visually inspect blades, blade bolts and the cutter 
assembly for wear or damage.  Replace worn or 
damaged blades and bolts to preserve balance. 

- 

Verify that machine and attachments, if any, are 
in good operating condition. 

- 

Do not engage blades until ready to mow.

- 

Use extra care when loading or unloading the 
machine into a trailer or truck.

- 

Slow down and use caution when making turns 
and crossing roads and sidewalks.  Stop blades if 
not mowing.

- 

Do not run the engine in an enclosed area where 
dangerous carbon monoxide fumes can collect.

- 

Do not place your foot on the ground while 
operating the machine. 

- 

Before operating, lower the discharge chute, 
install the mulcher or put the entire grass catcher 
in place.

- 

Keep clear of the discharge opening at all times. 
Never direct the discharge toward a bystander.  
Stop operation if someone approaches.

- 

Keep washout ports and other mower housing 
service openings closed when mowing.

- 

Use care when pulling loads or using heavy 
equipment.

 

-  Use only approved drawbar hitch points.

 

-  Limit loads to those you can safely control.

 

-  Do not turn sharply.  Use care when reversing. 

 

-  Use counterweight(s) or wheel weights when 

suggested in the operator's manual.

- 

Never leave a machine unattended.  Always turn 
off blades, set parking brake, stop engine and 
remove key before dismounting.