Troy-Bilt TB 2246 Benutzerhandbuch

3. 

Rotate the seat into position and secure the seat into place 

with the previously removed shoulder screws, flange 

bearings and flange lock nuts. Be careful not to crimp or 

damage the wire harness while installing the seat. See 

Figure 3-3.

4. 

Using the harness clip attached to the harness, secure the 

excess wire to the fender by snapping the harness clip in 

place as shown in Figure 3-4.

Never operate the mower deck 

without the chute deflector installed and in the 

down position.
 

Check the mower deck for shipping braces (with tags) that may 

be holding the chute deflector upward for shipment Some decks 

have two braces (50” & 54”) and some have one (42” & 46”).  If a 

brace(s) are present, they must be removed before operating the 

tractor. Holding the chute deflector fully upward, remove the 

shipping brace(s) by grasping it and rotating it clockwise. Lower 

the chute deflector. See Figure 3-5.