Troy-Bilt TB2450 Benutzerhandbuch

Activating the PTO engages power to 

the cutting deck or other (separately 

available) attachments. Pull outward 

on the PTO/Blade Engage knob to 

activate it. Push the PTO/ Blade Engage 

knob inward to disengage the power 

to the cutting deck or other (separately 

available) attachments.
NOTE: The PTO/Blade Engage knob 

must be in the disengaged (OFF) 

position when starting the engine.

Located in the center of the tractor’s dash 

panel below the steering wheel, the Parking 

Brake/Cruise Control lever is used to engage 

the parking brake and the cruise control Refer 

to the Operation section of this manual for 

detailed instructions regarding the parking 

brake.
NOTE: The parking brake must be set if the 

operator leaves the seat with the engine 

running or the engine will automatically shut 

off.
NOTE: Cruise control can NOT be engaged 

at the tractor’s fastest ground speed. If the 

operator should attempt to do so, the tractor 

will automatically decelerate to the fastest 

optimal mowing ground speed.

Never leave a running machine 

unattended. Always disengage PTO, set parking 

brake, stop engine and remove key to prevent 

unintended starting.