Troy-Bilt N779Pony Benutzerhandbuch

12

Found on your tractor’s right fender, 
the deck lift lever is used to change 
the height of the cutting deck. To use, 
move the lever to the left, then place 
in the notch best suited for your 
application.

Found on the tractor’s right fender, 
the PTO (blade engage) lever is used 
to engage power to the cutting deck 
or other (separately available) 
attachments. To operate, move the 
lever all the way forward. Moving the 
lever all the way rearward into the 
PTO OFF position disengages power 
to the cutting deck/ attachment. 

Never leave a running machine

unattended. Always disengage PTO, move
shift lever into neutral position, set parking
brake, stop engine and remove key to prevent
unintended starting.

To start the engine, insert the key into the ignition 
switch and turn clockwise to the START position. 
Release the key into the NORMAL MOWING MODE 
position once the engine has fired.

To stop the engine, turn the ignition key 
counterclockwise to the OFF position. See Figure 7. 

 Prior to operating the tractor, refer to both 

Safety Interlock Switches on page 13 and Starting The Engine 
on page 14 of this manual for detailed instructions 
regarding the Ignition Switch Module and operating the 
tractor in REVERSE CAUTION MODE.

3TART

0OSITION

3TOP

0OSITION

.ORMAL

$RIVING