Alamo FC-0016 Benutzerhandbuch

A96B 03/06

Operation Section 4-29

© 2006 Alamo Group Inc.

IMPLEMENT AND ALL CONTROLS BEFORE ATTEMPTING TO OPERATE.  The operator must read and

understand the Safety and Operation Sections of the implement and tractor operator’s manuals.  These

manuals must be read and explained to any operator who cannot read.  Never allow someone to operate the

implement and tractor without complete operating instructions.

Before starting any  operation, the operator must become familiar with the area to be worked in and any

obstacles and hazards contained within to ensure safety to the operator, bystanders, and equipment.  Special

attention should be paid to foreign debris, rough terrain, steep slopes, and passersby and animals in the area.

Extreme care should be taken when operating near loose objects such

as gravel, rocks, wire, and other debris.  Inspect the area before

mowing.  Foreign objects should be removed from the site to prevent machine damage

and/or bodily injury or even death.  Any objects that cannot be removed must be clearly

marked and carefully avoided by the operator.   Stop mowing immediately if  blades strike a

foreign object.  Repair all damage and make certain rotor or blade carrier is balanced

before resuming mowing. 

(SGM-5)

Many varied  objects, such as wire, cable, rope, or chains, can become entangled  in  the

operating parts of the mower head.  These items could then swing outside the housing at

greater velocities than the blades.  Such a situation is extremely hazardous and could result in serious injury

or even death.  Inspect the cutting area for such objects before mowing.  Remove any like object from the site.

Never allow the cutting blades to contact such items. 

 (SGM-6)