Alamo FC-0016 Benutzerhandbuch
OPERATION
A96B 03/06
Operation Section 4-43
© 2006 Alamo Group Inc.
OPERA
T
ION
Tongue bending or binding
Improper Drawbar.
Add attaching Plate to all 3-Point
in turns.
draw bars.
BREAKING BLADE BOLTS
Operating with loose Blade Bolts.
Tighten Blade Bolts to 300 ft./lbs
(Right Hand threads)
(Right Hand threads)
Worn Blade Bolt.
Replace Bolt.
CUTTING TOO HIGH
Blades bent up.
Replace Blades.
Blade Carrier bent.
Straighten or replace Blade Carrier.
Blades on upside down.
Turn Blades right side up and tighten.
MOWER WINDROWING
Cutting heavy material.
Raise mower and reduce
ground speed.
ground speed.
BROKEN CROSS OR
Load too high for joint.
Use protective device with joint.
CUPS
Check joint angles and phasing.
Slow down or raise Mower.
(See Clutch Maintenance)
Slow down or raise Mower.
(See Clutch Maintenance)
END GALLING OF
Speed too high during turns.
Reduce PTO speed.
CROSS AND CUPS
NEEDLE ROLLERS
Load too high for joint.
Check for small joint angles.
HAVE BRINELLED
Use protective device.
INTO CUP AND CROSS
Check joint angles and phasing.