Alamo SL72 Benutzerhandbuch
OPERATION
SL72 03/08
Operation Section 4-11
© 2008 Alamo Group Inc.
OPERA
T
ION
7.1 Skid Steer Pre-Operation Inspection/Service
Refer to the skid steer operator’s manual to
ensure a complete pre-operation inspection and
scheduled service is performed according to
manufacturer recommendations. The following
is a partial list of items requiring inspection:
•
ensure a complete pre-operation inspection and
scheduled service is performed according to
manufacturer recommendations. The following
is a partial list of items requiring inspection:
•
Tire condition/air pressure
•
Wheel lug bolts
•
SMV sign is clean and visible
•
Skid Steer lights are clean and functional
•
Skid Steer Seat belt is in good condition
•
Skid Steer operator enclosure is in good
condition
condition
•
Operator front protective door condition
•
No oil leaks
•
Radiator free of debris
•
Engine oil level and condition
•
Engine coolant level and condition
•
Hydraulic oil level and condition
•
Fuel condition and level
•
Sufficient lubrication at all lube points
•
Air filter condition
7.2 Mower Pre-Operation Inspection/Service
Before each mower use, a complete inspection and service is required to ensure the mower is in a good and
safe working condition. Damaged and/or broken parts should be repaired and/or replaced immediately. To
ensure the mower is ready for operation, conduct the following.
safe working condition. Damaged and/or broken parts should be repaired and/or replaced immediately. To
ensure the mower is ready for operation, conduct the following.
All Safety Shields, Guards and Safety devices including (but not limited to) - the Deflectors,
Chain Guards and Height Limiting Safety Chain should be used and maintained in good
Chain Guards and Height Limiting Safety Chain should be used and maintained in good
working condition. All safety devices should be inspected carefully at least daily for missing
or broken components. Missing, broken, or worn items must be replaced at once to reduce
the possibility of injury or death from thrown objects, entanglement, or blade contact.
or broken components. Missing, broken, or worn items must be replaced at once to reduce
the possibility of injury or death from thrown objects, entanglement, or blade contact.
(SPU-28)
Replace bent or broken blades with new blades. NEVER ATTEMPT TO STRAIGHTEN,
WELD, OR WELD HARDFACING ON BLADES SINCE THIS WILL LIKELY CRACK OR
OTHERWISE DAMAGE THE BLADE WITH SUBSEQUENT FAILURE AND POSSIBLE
SERIOUS INJURY FROM THROWN BLADES.
WELD, OR WELD HARDFACING ON BLADES SINCE THIS WILL LIKELY CRACK OR
OTHERWISE DAMAGE THE BLADE WITH SUBSEQUENT FAILURE AND POSSIBLE
SERIOUS INJURY FROM THROWN BLADES.
(SGM-10)