Alamo RX96 Benutzerhandbuch
OPERATION
RX96 03/09
Operation Section 4-3
© 2009 Alamo Group Inc.
OPERA
T
ION
1.
Standard Equipment and Specifications
RX96
Horsepower Required
30 HP Min. (Pull)
55 HP (Lift)
30 HP (Semi-Mount)
Cutting Capacity (Max.)
2-1/2”
Cutting Height
1-12”
Safety Deflector
Std.
Cutting Width
97”
Overall Length
101” (Lift, Semi-Mount)
136” (Pull)
Weight (Approx.)
1634 lbs
Hitch
CAT II-III and Q.H. (Lift)
Clevis (Pull)
CAT II (Hydraulic Offset Unit) (Semi-Mount)
Blade Carrier
Pan
Blade Tip Speed (FPM)
17,004 (540 RPM)
16,821 (1000 RPM)
Center Gearbox Rating
120 HP
Outboard Gearbox Rating
110 HP
Output Shaft Diameter
2”
Driveline Size
Cat 4
Deck Thickness
10 Ga.
Side Skirt
1/4” x 10”
Transport Width
104”
Jack Stand
Std. (pull)
Overall Width
104”
Replaceable Skid Shoes
Std.
Blade Overlap
4”
Tractor Static Vertical Drawbar Load Rating (Min.)
960 lbs.
The Mower is designed for certain mowing applications and is rated to cut up to a specific
size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this
mower to cut vegetation above the Mower’s rated capacity or to cut any type of non-
vegetative material. Only operate this Mower on a properly sized and equipped Tractor.
Operating this Mower in an application for which it is not designed and/or operating the
Mower with the wrong size Tractor can cause Mower component damage and equipment
failure resulting in possible serious injury or death.
size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this
mower to cut vegetation above the Mower’s rated capacity or to cut any type of non-
vegetative material. Only operate this Mower on a properly sized and equipped Tractor.
Operating this Mower in an application for which it is not designed and/or operating the
Mower with the wrong size Tractor can cause Mower component damage and equipment
failure resulting in possible serious injury or death.
(SGM-14)