Alamo SL60 Benutzerhandbuch

Seite von 126
OPERATION
SL60   03/08
Operation Section 4-5
© 2008 Alamo Group Inc
OPERA
T
ION
3. SKID STEER REQUIREMENTS
Skid Steer Requirements and Capabilities
ASAE approved Roll-Over Operator Protective Structure and Seatbelt. 
Operator Protective Door ................. Contact authorized skid steer dealer for equipping unit with 
operator protective door.
Skid Steer Warning Equipment ........ Slow Moving Vehicle (SMV) emblem, proper lighting
Hitch ................................................. Universal Mount, Quick Hitch
Front Auxiliary Hydraulics................. Mower drive motors must be matched with the hydraulic output
capacity of the skid steer
Mower Drive Motors:
Low Volume ...............For Systems Delivering 11-14 GPM at 1500-3000 PSI;
105 ft./lbs. Torque at 2500 PSI
Medium Volume .........For Systems Delivering 15-19 GPM at 1500-3000 PSI;
127 ft./lbs. Torque at 2500 PSI
High Volume ..............For Systems Delivering 20-25 GPM at 1500-3000 PSI;
153 ft./lbs. Torque at 2500 PSI
3.1 ROPS and Seat Belt
The tractor must be equipped with a Roll-Over-Protective-Structure (ROPS) (tractor cab or roll-bar) and seat
belt to protect the operator from falling off the tractor, especially during a roll over where the driver could be
crushed and killed.  Only operate the tractor with the ROPS in the raised position and seat belt fastened.
Tractor model not equipped with a ROPS and seat belt should have these life saving features installed by an
authorized dealer.  OPS-U- 0003
Operate this Equipment only with a Power Unit equipped with an
approved operator Roll-Over Protective Structure (ROPS).  Always
wear seat belts.  Serious injury or even death could result from falling
off the Power Unit--particularly during a turnover when the operator
could be pinned under the Operator Protective Structure. 
(SPU-14)