Alamo 02983328C Benutzerhandbuch

AXTREME   03/09

Operation Section 3-48

©2009 Alamo Group Inc.

To shut down attached mower head, first bring the

tractor to a complete stop. Decrease engine RPM

to idle then disengage cutterhead. The mower head

will come to a complete stop within a suitable

amount of time. Do not engage or disengage the

cutterheads at a high RPM unless there is an

emergency situation.

Park the tractor on a level surface, place the

transmission in park or neutral and apply the

parking brake, shut down the engine, remove the

key, and wait for all motion to come to a complete

stop before exiting the tractor.    OPS-B- 0011_D

ON-OFF Switch

BEFORE leaving the tractor seat, always engage the brake and/or set

the tractor transmission in parking gear, disengage the PTO, stop the

engine, remove the key, and wait for all moving parts to stop.  Place the

tractor shift lever into a low range or parking gear to prevent the tractor

from rolling.  Never dismount a Tractor that is moving or while the engine

is running.  Operate the Tractor controls from the tractor seat only.

  (SG-9)