Alamo EAGLE 10/15 Benutzerhandbuch
MAINTENANCE
EAGLE 15 03/09
Maintenance Section 5-5
©2009 Alamo Group Inc.
MAINTENANCE
CENTER & WING GEARBOXES
The Gearboxes have been filled with lubricant to the proper Level prior to shipment. However, you should
check the oil level on dipstick before operating, and frequently thereafter.
check the oil level on dipstick before operating, and frequently thereafter.
The gearbox should not require additional lubricant unless the box is cracked or a seal is leaking. It is
recommended that the oil level dipstick be removed after every 8 to 10 hours of operation and oil added until it
is at proper level on dipstick. Filler Plugs are located on top of all Gearboxes. Image AsmP-R-0033.
recommended that the oil level dipstick be removed after every 8 to 10 hours of operation and oil added until it
is at proper level on dipstick. Filler Plugs are located on top of all Gearboxes. Image AsmP-R-0033.
DIVIDER GEARBOX
The Test Plug for the Divider Gearbox is located on the right side of the input shaft. The filler pressure relief
Plug is on top of the Gearbox. Image MntP-R-0027
Plug is on top of the Gearbox. Image MntP-R-0027
Do not over-fill. If gearboxes are filled above the Test Plug Level, Pressure under working
conditions may cause grease seals to leak.
conditions may cause grease seals to leak.
Recommended lubricant is NLGI 000 Grease.
.