Alamo FC-0001 Benutzerhandbuch

MAVERICK   3/09

Operation Section 3-49

© 2009 Alamo Group Inc.

Never allow children or other persons to ride on the Tractor or Implement.
Falling off can result in serious injury or death.  

(SG-10)

Before transporting tractor between locations, idle
the tractor engine, disengage the attached head,
and wait for all head motion to come to a complete
stop.  Place the boom in its storage cradle rest
support and then turn the joystick master switch to
the OFF position.   

Placing Boom Articulating Arm on Boom Arm Rest
•

Extend the dipper section approximately half 
way out.

•

Bring the Lift to its full height and carefully 
swing the boom back until it is just positioned 
over the Boom Pin Rest.  NOTE:  There is a 
formed pin on the dipper section that fits onto 
the Boom Arm Lug Rest.

•

Lower the Lift until the Boom Arm Lug Rest on 
the Boom Pin Rest (this may take some re-
adjustment of the dipper section).

•

Use your joystick to swivel the head to the 
lefthand side so that the head is aligned with 
the tractors width (this prevents the head from 
protruding from the side of the tractor).

•

Place the Master Switch in to the OFF position.

The boom is now in the transport position.  To remove the boom from the Boom Rest, pull the Lift back and
raise the boom about 6 inches.  Then Swing the boom around to the desired position.
OPS-B- 0013

BOOM PIN REST

BOOM ARM LUG REST