Holder C 9.72 H Benutzerhandbuch
Operating Instructions
145 052
185
C 9700 ... C 9.88 H
Maintenance Every 1000 Service Hours
Lubricating the Cardan Shaft
-
Turn the steering wheel right or left until the steering
stop is met.
stop is met.
CAUTION
Carry out services in the articulated joint area
only with the engine shut off.
Carry out services in the articulated joint area
only with the engine shut off.
-
Remove the rubber protector.
-
Adjust the top cardan shaft (1) by hand until the grease
nipples are easily accessible.
nipples are easily accessible.
-
Grease the top cardan shaft.
-
Move centre cardan shaft (2) with starter, until grease
nipples are easily accessible.
nipples are easily accessible.
CAUTION
Make sure no-one is standing in the area of
the articulated joint when the starter is
operated.
Make sure no-one is standing in the area of
the articulated joint when the starter is
operated.
-
Grease the centre cardan shaft.
-
Adjust the lower cardan shaft (3) by moving the tractor
forward or back until grease the nipples are easily
accessible.
forward or back until grease the nipples are easily
accessible.
-
Grease the lower cardan shaft.
-
Refit the rubber protector at the articulated joint.
Bild_168
1
2
3