Husqvarna WH4818 / 966638602 Benutzerhandbuch
MaIntenanCe
31
1
2
Safety System
The machine is equipped with a safety system that
prevents starting under the following conditions.
The engine can only be started when:
prevents starting under the following conditions.
The engine can only be started when:
the blades are disengaged.
1.
the speed control is in the start position.
2.
make daily inspections to ensure that the safety
system works by attempting to start the engine when
one of the conditions is not met.
If the machine starts when one of these conditions
is not met, turn the machine off and repair the safety
system before using the machine again.
system works by attempting to start the engine when
one of the conditions is not met.
If the machine starts when one of these conditions
is not met, turn the machine off and repair the safety
system before using the machine again.
Function Check
Check the function of the safety electrical system on a
regular basis.
Check the function of the safety electrical system on a
regular basis.
engine must stop if blades are engaged without
1.
operator presence levers held down.
engine must stop if the speed control is taken
engine must stop if the speed control is taken
2.
out of the start position without holding down
operator presence levers.
engine must not start unless blades are off and
operator presence levers.
engine must not start unless blades are off and
3.
the speed control is in the start position.
8062-044
blade engagement control
1.
Speed control lever
2.
Check the safety system
Check the safety system
WARNING!
Do not operate the mower if the
interlock safety system allows
operating or starting in any unsafe
condition.
Do not operate the mower if the
interlock safety system allows
operating or starting in any unsafe
condition.