Husqvarna Robotic Lawn Mowe Benutzerhandbuch

10

Automower from

™

This chapter contains information you should be aware 
of when planning the installation.

An installation of Automower from Husqvarna™ 
includes four main components:

Automower, an automatic lawn mower that mows the 
lawn by moving in essentially an irregular pattern. 
The mower is powered by a maintenance-free 
battery.

Charging station, where your Automower returns 
when the charge level in the battery becomes too low.

The charging station has three functions:

•

To send control signals along the boundary wire.

•

To send out signals so the Automower finds the 
charging station.

•

To charge the Automower battery.

Transformer, which is connected between the 
charging station and a 230V wall socket. The 
transformer is connected to the wall socket via an 
integrated power cord and to the charging station via 
a 20 m long low voltage cable. The low voltage cable 
must not be extended.

Boundary wire, laid in a loop around the Automower’s 
working area. The wire is laid around the edges of the 
lawn and around objects and plants that the mower 
must not run into.

The boundary wire supplied for the installation is 
250 m long. If this is not sufficient more wire can be 
purchased, with a connector, and spliced onto the 
existing wire.

3012-691

3012-509

3012-220

3012-221