Husqvarna Robotic Lawn Mowe Benutzerhandbuch

Automower from 

49

™

This option in the main menu allows you to access 
the following functions on the Automower.

in order for the Automower to drive immediately 
to the charging station, charge the battery and 
then return to the automatic operating mode. 
Select the function and press YES when the 
cursor is on Yes.

to show the list of saved fault messages. Browse 
with the arrow buttons. The list can contain up to 
20 fault messages and each message is shown 
with the date and time.

to restore all settings to their original values. 
Everything except the language, PIN code and the 
settings under the buttons A, B and are reset. 
Select the function, enter your PIN code and press 
YES when the cursor is on Yes.

The lawn should not be cut too often to obtain the best 
mowing result. Consequently, it is important to limit the 
operating time using the timer function if the working 
area is less than 1800 m

2

. When Automower is 

allowed to mow too much, the lawn may appear 
flattened. Besides, the mower is subjected to 
unnecessary wear.

The timer function is also an ideal means to control 
during which periods the Automower should not mow, 
for example, when the children are playing in the 
garden.

When you set the timer, assume that Automower 
mows about 75 m

2

 per hour.

to temporarily disconnect the timer function.

to set the start and stop times.

to set other start and stop times for the days 
Friday - Sunday.

to select which days of the week the Automower 
should mow.

1-

1

2-

2