Husqvarna EZ4624 Benutzerhandbuch

English

-

46

Visually check that no damage is found on the lever, 

links, or switch belonging to the parking brake. 

Perform a standstill test and check that there is 

sufficient braking action.
To adjust the parking brake, contact the Husqvarna 

service workshop.

Check every 100 hours of operation. Check for severe 

cracking and large nicks. 
NOTE: The belt will show some small cracks in normal 

operation.
The belts are not adjustable. Replace belts if they 

begin to slip from wear.

•

Park on a level surface. Apply park brake.

•

Lower the deck into the lowest cutting position.

•

Using a ratchet with a 9/16” socket on the spring 

idler bolt to relieve the tension on the belt. 

•

Remove screws from both the left and right belt 

shields, and remove shields.

•

Remove any dirt or grass that may have 

accumulated around the cutter housings and entire 

deck surface.

•

Carefully roll the belt over the top of the cutter 

housing pulleys.

•

Remove the belt from around the electric clutch on 

the engine shaft.

•

The belt can now be removed.

8011-711

8011-622