Kunz MR55K Benutzerhandbuch
Figure 3: ATV Tongue Assembly
TIONS AND ADJUSTMENTS
OPERA
indicate safety instructions. Follow
injury and/or property damage.
This safety alert symbol is used to
these instructions to avoid personal
these instructions to avoid personal
w all instructions in this manual and the attached engine
: Do not allow anyone to operate this equipment who has not fully read and
comprehended the safety manual and who has not been properly trained in the safe
operation of the equipment.
operation of the equipment.
: Operator should
h all functions of the unit.
A. TO
E CONFIGURATIONS AND
WARN
engine and allow the mowe
plete stop
before adjusting the tongue.
The hitching system is designed so that the rough cut mower can be pulled directly behind a tow
vehicle or offset to the left or right. See Figure 4.
vehicle or offset to the left or right. See Figure 4.
Note: When pulling the mower directly behind, the hitch pivot should be fastened on the right
carrier arm for maximum maneuverability. See Figure 2. When pulling the mower in
the offset position the hitch pivot can be fastened on either the right or left carrier arm.
See Figure 2.
the offset position the hitch pivot can be fastened on either the right or left carrier arm.
See Figure 2.
Read and follo
manual.
manual.
WARNING
WARNING
be familiar wit
NGU
ADJUSTMENTS
ING: Shut off the
r blades to come to a com
W
n of
W
Pin
(Placed Back From
Direction of Trav
Direction of Trav
5/16” Wire
Lock Pins
Lock Pins
Direction of Travel
Screw Pin Shackle
Clevis
Clevis
Tongue
Shift Tong
Between Hol
Between Hol
ue Left or Right
es
ire Lock Sectio
ire Lock
ire Lock
el)
6