Dixon KOH/968999626 Benutzerhandbuch
English
-
56
LUBRICATION
Lubricating the Cables
If possible, grease both ends of the cables and move the controls to end stop positions when lubricating. Refi t the
rubber covers on the cables after lubrication. Cables with sheaths will bind if they are not lubricated regularly. If a
cable binds, it can disrupt operation.
rubber covers on the cables after lubrication. Cables with sheaths will bind if they are not lubricated regularly. If a
cable binds, it can disrupt operation.
If a cable binds, remove the cable and hang it vertically. Lubricate it with light engine oil until the oil begins to
escape from the bottom.
escape from the bottom.
Tip: Fill a small plastic bag with oil and tape it so that it seals against the sheath and allow the cable to hang
vertically from the bag overnight. If you do not succeed in lubricating the cable, it must be replaced.
vertically from the bag overnight. If you do not succeed in lubricating the cable, it must be replaced.
Lubricating in Accordance with the
Lubrication Schedule
Lubrication Schedule
Checking the hydraulic oil
8011-565
8011-571
Lubricating the lengthways adjuster under the seat
IMPORTANT INFORMATION
Use minimal lubrication and remove
excess lubricant so that is does not come
into contact with belts or belt pulley drive
surfaces.
excess lubricant so that is does not come
into contact with belts or belt pulley drive
surfaces.
Shaft Bushings and Linkage
Lubricate the bearing of the shafts and linkage for
brake system and steering with oil spray or oil can.
brake system and steering with oil spray or oil can.
1. Hydraulic System, Oil Level
The hydraulic oil and fi lter must be replaced every 300
hours, and at least once a year. Contact an authorized
service workshop.
hours, and at least once a year. Contact an authorized
service workshop.
Check the oil level in the hydraulic tank daily. The level
shall be about ¾"-1" (19 - 25 mm) below the top of the
tank.
shall be about ¾"-1" (19 - 25 mm) below the top of the
tank.
Check connections, hoses, and tubes for damage or
leaks. Replace or repair if doubtful.
leaks. Replace or repair if doubtful.
Changing Oil and Filters
Oil and fi lter changes should be carried out by
an authorized service workshop due to the risk of
impurities enter the system.
an authorized service workshop due to the risk of
impurities enter the system.
2. Driver’s Seat
Tip the seat.
Lubricate the front hinges using an oil can.
Lubricate the lengthways adjustment mechanism with
the oil can.
the oil can.
Lubricate the lengthways adjustment runners with the
oil can.
oil can.
WARNING!
If a leak is suspected, use a
piece of cardboard or wood, NOT
your hands, to check for leaks.
Escaping hydraulic oil under
pressure can have suffi cient force
to penetrate the skin, causing
serious injury.
piece of cardboard or wood, NOT
your hands, to check for leaks.
Escaping hydraulic oil under
pressure can have suffi cient force
to penetrate the skin, causing
serious injury.
If injured by escaping fl uid,
see a doctor at once. Serious
infection or reaction can develop
if proper medical treatment is not
administered immediately.
see a doctor at once. Serious
infection or reaction can develop
if proper medical treatment is not
administered immediately.