Dixon RAM 44 / 968999551 Benutzerhandbuch

Seite von 88
English-
52
MAINTENANCE
Cleaning and Washing
Regular cleaning and washing, especially 
under the mower deck, will increase the 
machine’s lifespan. Make it a habit to clean 
the machine directly after use (after it is 
cooled), before the dirt sticks.
Do not spray water on the top of the mower 
deck. Use compressed air to clean the top 
side of mower deck. Regularly clean deck 
and underside of the deck with normal water 
pressure. Do not use a high pressure washer 
or steam cleaner. Avoid spraying engine and 
electrical components with water
Do not rinse hot surfaces with cold water. Let 
unit cool before washing.
Caster Wheels
Check every 200 hours. Check that wheels 
rotates freely. If wheels do not rotate freely 
take the unit to your dealer for service.
Foam filled tires or solid tires will void the 
warranty.
Removal and installation of caster wheel
1.
Remove nut and caster bolt.
2.
Pull the wheel out of the fork and take 
care of the sleeve.
3.
Install in reverse order. Tighten caster 
bolt.
Hardware
Check daily. Inspect the entire machine for 
loose or missing hardware.
8050-092
Cleaning
Use protective glasses when 
cleaning and washing.
1
2
3
Caster wheels
1. Nut
2. Bolt
3. Sleeve
8050-159
IMPORTANT INFORMATION
DO NOT add any type of tire liner or foam 
fill material to the tires. Excessive loads 
created by foam filled tires will cause 
premature failures.
Only use O.E.M. specified tires.