Dixon Ram Ultra 72 Benutzerhandbuch

Seite von 72
SAFETy
Dixon-
11
WARNING!
When using the machine, approved personal protective equipment (shown in 
illustrations) shall be used. Personal protective equipment cannot eliminate the 
risk of injury but it will reduce the degree of injury if an accident does happen. 
Ask your retailer for help in choosing the right equipment.
Personal Safety Equipment
8011-670a
Personal protective equipment
6003-004
Mow up and down, not side to side
WARNING!
Do not drive up or down hills 
with slopes greater than 10 
degrees. And do not drive across 
any slopes.
Make sure that you have first aid equipment 
• 
close at hand when using the machine.
Never use the machine when barefoot. 
• 
Always wear protective shoes or boots, 
• 
preferably with steel toe caps.
Always wear approved protective glasses or 
• 
a full visor when assembling or driving.
Always wear gloves when handling the 
• 
blades.
Never wear loose clothing that can get 
• 
caught in moving parts.
Use ear protectors to avoid damage to 
• 
hearing.
Slope Operation
Slopes are a major factor related to loss of control and 
tip-over accidents, which can result in severe injury or 
death. Operation on all slopes requires extra caution. If 
you cannot back up the slope or if you feel uneasy on 
it, do not mow it.
Mow up and down slopes (10 degrees 
• 
maximum), not across.
Watch for holes, ruts, bumps, rocks, or 
• 
other hidden objects. Uneven terrain could 
overturn the machine. Tall grass can hide 
obstacles.
Choose a low ground speed so that you will 
• 
not have to stop while on the slope.
Do not mow on wet grass. Tires may lose 
• 
traction.
Avoid starting, stopping, or turning on a 
• 
slope. If the tires lose traction, disengage the 
blades and proceed slowly straight down the 
slope.
Keep all movement on the slopes slow and 
• 
gradual. Do not make sudden changes in 
speed or direction, which could cause the 
machine to roll over.
Use extra care while operating machine with 
• 
grass catchers or other attachments; they 
can affect the stability of the machine.