Dixon RAM 52ZT Benutzerhandbuch

maIntenanCe

42

Visually check that no damage is found on the lever, 
links, or switch belonging to the parking brake. 
Perform a standstill test and check that there is 
sufficient braking action.
To adjust the parking brake, contact the dixon service 
workshop.

8058-020

Check every 100 hours of operation. Check for severe 
cracking and large nicks.
NoTE: The belt will show some small cracks in normal 
operation.
The belts are not adjustable. replace belts if they 
begin to slip from wear.
Deck Belt Removal

Park on a level surface. Apply parking brake.

1. 

lower the deck into the lowest cutting position.

2. 

remove bolts from belt shields and remove 

3. 

shields.
remove any dirt or grass that may have 

4. 

accumulated around the cutter housings and 
entire deck surface.
remove tension on the belt by moving the idler 

5. 

arm.
Carefully slip belt up over the top of the cutter 

6. 

housing pulleys and remove belt. rolling belt over 
the pulleys may damage the belt.

belt shields

Idler arm

8011-622