Dixon RAM 52ZT BF Benutzerhandbuch

ContRols

19

The deck cutting height is obtained by pressing 
the button on the lift lever and pulling backward 
to lift the deck. To lower the deck, push button on 
the lift lever and push forward allowing the deck 
to lower to the correct cutting height. The cutting 
height range is from 1½" (38mm) to 4" (102mm) in ½ 
(13mm) increments. The heights are measured from 
the ground up to the blade tip with the engine not 
running.

8050-838

The throttle control regulates the engine speed and 
thereby the rate of rotation of the blades, assuming 
the blade switch is pulled out, see Engaging the 
mower deck.
In order to increase or decrease the engine speed, 
the control is moved forward or back respectively.
Avoid idling the engine for long periods, as there is a 
risk of fouling the spark plugs.
USE FULL THROTTLE WHEN MOWING, for best 

mower performance and battery charging.

8050-839

8050-839

The choke control is used for cold starts in order to 
provide the engine with a richer fuel mixture.
for cold starts the control should be pushed to the on 
position.