Dixon RAM 52ZT BF Benutzerhandbuch

opeRatIon

33

Bypass Linkages
When pushing or pulling the mower, engage the 
ZT-2800 (Integrated Zero turn Transaxle) bypass 
linkages. The ZT-2800 bypass linkages are located on 
the rear of the frame, below the rear engine guard.

raise the deck into the highest cutting 

1. 

position.
Pull the bypass linkages up and out of the 

2. 

keyhole slots. release the levers with the 
head outside the frame and held in the bypass 
position.
To reengage the ZT-2800 to drive, reverse the 

3. 

above procedure.

load the machine into truck or trailer by driving up 
ramps in low gear. do NoT lIfT! The machine is not 
intended to be lifted by hand.

8058-032

8058-032