Dixon 965882101 Benutzerhandbuch

OPERATION

DIXON

-33

Move the steering controls outward.

• 

8061-020 

When pushing or pulling the mower, engage the EZT 

(Integrated Zeroturn Transaxle) bypass linkages. The 

EZT bypass linkages are located on the rear of the 

frame, below the rear engine guard.

Raise the deck into the highest cutting position.

1. 

Pull the EZT bypass linkages up and out of 

2. 

the keyhole slots. Release the levers with the 

head outside the frame and held in the bypass 

position.
To reengage the EZT’s to drive, reverse the 

3. 

above procedure.

Load the machine into truck or trailer by driving up 

ramps in low gear. DO NOT LIFT! The machine is not 

intended to be lifted by hand.

8058-032

8058-032

Remove key. Always remove key when leaving 

• 

the mower to prevent unauthorized use.