Dixon 700 Series Benutzerhandbuch

 

 

a recreational vehicle and it should not 

be operated as such.

 

 

 

Your Zero Turning Radius Mower is equipped 

with switches interlocked for your safety.

 

1.         The mower blades must be disengaged 

before engine will start.

 

2.         The Steering Control Levers must be in 

the neutral "OUT" position before the 

engine will start.

 

3.         The engine will stop if the mower blade 

clutch is engaged when the operator 

leaves the driver's seat.

 

4.         The engine will stop if the Steering Control 

Levers are not in the neutral "OUT" 

position when the operator leaves the 

driver's seat.

 

5.         The engine will stop if the brake is

 

"SET" and the Steering Control Levers 

are moved to the "IN" position.

 

6.         The engine will stop if the brake is

 

"SET" and the mower blade clutch is 

engaged.

 

 

 

1.         Make sure fuel tank is full. Use regular 

unleaded gasoline (see engine owner's 

manual for more details).

 

 

2.         Make sure dirt and foreign matter is

 

kept out of gas tank. Use a clean funnel and 

gas can.

 

3.         Do not mix oil with gasoline.

 

4.         Do not use white, high test or premium 

gasoline. Do not use de-icers, carburetor 

cleaners, or other such additives.

 

5.         Check the crankcase oil level. Make sure the 

engine is off. The mower should be parked 

on a level area. Do not overfill. (See your 

engine manual for more detailed instruction.)

 

6.         Check the hydrostatic transmission oil level. 

(See "Maintenance" section of this manual.)

 

7. 

Check battery fluid level.

 

8. 

Inspect V-belts.

 

9. 

Check tire pressure:

 

Model

 

Front tires

 

Rear tires

 

All Models

 

 

12psi

 

 

12psi

 

 

10.       Make sure underside of mower deck is free 

of grass.

 

11.       Make sure mower blades are sharp and 

secured tightly.

 

 

 

3

 

P-11408 (2/99)