Dixon 965871801 Benutzerhandbuch

lUBRICATION

Dixon-

49

If possible, grease both ends of the cables and move 

the controls to end stop positions when lubricating. 

Refit the rubber covers on the cables after lubrication. 

Cables with sheaths will bind if they are not lubricated 

regularly. If a cable binds, it can disrupt operation.
If a cable binds, remove the cable and hang it 

vertically. lubricate it with light engine oil until the oil 

begins to escape from the bottom. 
Tip: Fill a small plastic bag with oil and tape it so that 

it seals against the sheath and allow the cable to hang 

vertically from the bag overnight. If you do not succeed 

in lubricating the cable, it must be replaced.

lubricate with a grease gun, one zerk for each wheel 

mount, until the grease is forced out.
Use only good quality bearing grease.
Grease from well-known brand names (petrochemical 

companies) usually maintains a good quality.

lubricate with a grease gun, one zerk for each set of 

wheel bearings, until the grease is forced out.
Use only good quality bearing grease.

8050-829

8011-732

lower the cutting deck completely.
If you use grease gun without rubber hose, the foot 

plate must be removed.
lubricate with a grease gun, one zerk, 
2-3 strokes.
Use only good quality bearing grease.