Dixon 3500 Series Benutzerhandbuch

41

TROUBLESHOOTING

6.

ENGINE RUNS BUT MOWER WON’T MOVE FORWARD

Drive belt broken or slipping- - - - - - - - - - - - - - - - - - - - replace drive belt

Bad transmission- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - consult dealer

Transmission by-pass may be on- - - - - - - - - - - -turn off 

(see page 19)

7.

MOWER LOSES POWER OR TRANSMISSION OVERHEATS

Engine air filter-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -clean or replace

Transmission damage- - - - - - - - - - - - - - - - - - - - - - - - - - - - - consult dealer

Transmission blowing oil out cap - - -overfilled/water contaminated

8.

ENGINE STALLS WHEN BLADES ARE ENGAGED

Operator not on seat- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -sit on seat

Faulty interlock system- - - - - - - - - - - - - - - - - - - - - - - - - - - - - consult dealer

Bad blade spindle  bearing - - - - - - - - - - - - - - - - - - - - - - - - -consult dealer

Deck drive belt not properly routed- - - - - - - - - - - - - - - - - - - - - - - reroute

Blades blocked by foreign material - - - - - - - - - - - - - -clean under deck

9.

DRIVE SYSTEM

Mower pulls to side- - - - check tire inflation/adjust control linkage

Mower creeps in neutral- - - - - - - - - - - - - - - - - - - -adjust control linkage

Low on power- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - check belt tension

10.

CUT QUALITY

Cut uneven left to right- - - - - - - - - - - - - check tire inflation/level deck

Ends of grass blades are ragged- - - - - - - - - - - - - - - - - -sharpen blades

Poor dispersal of grass- - - - - - - - - - -clean deck/check for loose belt

Skips in spots- - - - - - - - - - - - check for loose belt/slow ground speed