Dixon SE 6125 KOH Benutzerhandbuch

SAFETy

Dixon

-15

Ensure that nuts and bolts, especially the 

• 

fastening bolts for the blade attachments, 

are properly tightened, torqued and that the 

equipment is in good condition.
Do not modify safety equipment. Check 

• 

regularly to be sure it works properly. The 

machine must not be driven with defective 

or unmounted protective plates, protective 

cowlings, safety switches, or other protective 

devices.
Do not change the settings of governors and 

• 

avoid running the engine with overly high 

engine speeds. If you run the engine too fast, 

you risk damaging the machine components.
Sparking can occur when working with the 

• 

battery and the heavy cables of the starter 

circuit. This can cause battery explosion, fire or 

eye injury. Sparking in this circuit can not occur 

after the chassis cable (normally negative, 

black) is removed from the battery.

Use protective goggles.

• 

Ensure that the fuel filler cap is mounted tightly 

• 

and no flammable substances are stored in an 

open vessel.
Never work with the starter circuit if there is 

• 

spilled fuel.
Disconnect the chassis cable from the battery 

• 

first and reconnect it last.
Do not make a bridge short circuit across the 

• 

starter relay to run the starter.
Never use the machine indoors or in spaces 

• 

lacking proper ventilation. The exhaust fumes 

contain carbon monoxide, an odorless, 

poisonous, and lethal gas.
Stop and inspect the equipment if you run over 

• 

or into anything. If necessary, make repairs 

before starting.
Never make adjustments with the engine 

• 

running.
The machine is tested and approved only 

• 

with the equipment originally provided or 

recommended by the manufacturer. Only use 

approved repair parts for the machine.

6003-009

8009-728