Dixon 435068 Benutzerhandbuch

•  Position front hole in side suspension arm (A) over 

pin on outside of tractor chassis and secure with large 

washer and large retainer spring (B).

•  Repeat on opposite side of tractor.

NOTE: Depending on model, bracket (T) may be differ-

ent than shown but hole for anti-sway bar will be in same 

position/location.

8  ATTACH FRONT LINK (E) (See Fig. 14)
•  Turn steering wheel to position wheels straight forward.
•  From front of tractor, insert rod end of front link (E) 

through front hole in tractor front suspension bracket (F).

•  Move to left side of mower and and insert large retainer 

spring (G) through hole in front link (E) behind front 

suspension bracket (F).

•  Insert other end of link (E) into hole in front mower 

bracket (H) and secure with washer and small retainer 

spring (J).

NOTE: Requires deck lifting.

7.  ATTACH REAR LIFT LINKS (C) (See Fig. 13)
•  Insert rod end of rear lift link (C) into hole (U) in tractor lift 

shaft suspension arm and pivot link down to mower.

•  Lift rear corner of mower and position slot in link as-

sembly over pin on rear mower bracket (D) and secure 

with large washer and large retainer spring.

•  Repeat on opposite side of tractor.

•  Pivot the integrated washer end of anti-sway bar (S) 

towards mower deck bracket on right side of mower. 

Insert integrated washer end of bar into hole in rear 

mower bracket (D). Move mower as needed to insert 

integrated washer end of bar into rear mower bracket (D).

•  Secure with small washer and small retainer spring as 

shown.