Dixon 965882301 Benutzerhandbuch

Seite von 75
SAFETY
16-
DIXON
8011-514
Regularly clean deck
The blades are sharp and can cause cuts and 
• 
gashes. Wrap the blades or use protective 
gloves when handling them.
Check the parking brake’s functionality 
• 
regularly. Adjust and service as necessary.
The mulch blades should only be used in 
• 
familiar areas when higher quality mowing is 
desired.
Reduce the risk of fire by removing grass, 
• 
leaves, and other debris that may have 
accumulated on the machine. Allow the 
machine to cool before putting it in storage.
Regularly clean deck and underside of 
• 
deck, avoid spraying engine and electrical 
components with water.
Transport
The machine is heavy and can cause serious 
• 
crushing injuries. Be extra cautious when it is 
loaded on or unloaded from a vehicle or trailer.
Use an approved trailer to transport the 
• 
machine. Activate the parking brake, turn off 
the fuel supply, and fasten the machine with 
approved fastening devices, such as bands, 
chains, or straps, when transporting.
Do not operate this machine on public 
• 
roadways.
Check and abide by local traffic regulations 
• 
before transporting the machine on any road.
Do not tow this machine, it may cause damage 
• 
to the drive system.
Do not tow any trailers, etc. with this mower. 
• 
They may jackknife or overturn causing 
damage to the mower and possibly serious 
injury to the operator.
Load the unit onto truck or trailer by driving up 
• 
ramps of suitable strength using a slow speed. 
Do not lift! The machine is not intended to be 
lifted by hand.
WARNING!
Escaping hydraulic oil under pressure 
can have sufficient force to penetrate 
the skin, causing serious injury. 
If injured by escaping fluid, see a 
doctor at once. Serious infection 
or reaction can develop if proper 
medical treatment is not administered 
immediately.
IMPORTANT INFORMATION
The parking brake is not sufficient to lock the 
machine in place during transport. Ensure that 
the machine is well fastened to the transport 
vehicle. Always reverse the machine onto the 
transport vehicle to avoid tipping it over.