Dixon 3361 Benutzerhandbuch

 

1.   To start mower blades, pull up slightly on blade drive switch handle and move it forward to 

the "ON" position.

 

2.   To stop mower blades, move switch handle to th e "OFF" position

 

 

IMPORTANT -   PERFORM SAFETY CHECKS AFTER MAKING ANY REPAIRS OR ADJUSTMENTS 

 
1.   After reassembly, while seated on mower, attempt to start engine with mower deck  

engaged. Engine should /VO7"start. If engine does start, return the mowerto an Authorized  
Dixon dealer for adjustment or repair. 

 

2.    Disengage mower deck and start engine. With the operator in the normal seated position, 

engage mower deck and remove weight from seat. The engine should stop. If the engine 
does  NOT  stop when operator rises from seat, return the mower to an Authorized Dixo n 
dealer for adjustment or repair.

 

3.   Engage. Th e n disengage  mower blade in each cutting height. Insure that blade 

disengages and comes to a stop within (5) seconds in each height position. If blade does 
NOT disengage properly, contact your Authorized Dixon deal er.

 

 

 

Tighten nut on brake rod P/N 2533, located in front of the transaxle on each side, just enough 
to prevent brake from slipping when engaged.

 

CAUTION: Over tightening may cause premature wear on the brake band P/N 5085.

 

Revised 7/93

 

P/N 8111 

 

Page 3 of 8