Dixon 966985401 Benutzerhandbuch

ContRoLs

21

The seat can be adjusted lengthways. When making 
adjustments, the lever under the front edge of the 
seat is moved to the left (as seen by the driver in the 
seat), after which the seat can be moved backward or 
forward.

8011-441

The hour meter displays the total operating time.
It will flash CHG OIL (Change Oil) at 50 hour intervals. 
The flash duration is one hour before and one hour 
after the interval. The CHG OIL icon will come on 
and shut off automatically. The hour meter cannot be 
manually reset.

8061-017

The deck cutting height is obtained by pressing the 
foot pedal forward to lift the deck. To lower the deck, 
apply pressure to the top side of the foot pedal and 
allow it to pivot while the lift arm rotates to the rear of 
the unit. To stop in the desired cutting position, rotate 
the foot pedal down into the notch in the height plate. 
The cutting height range is from 1½" (38mm) to 4½" 

(114mm) in ¼ (6mm) increments. The heights are 
measured from the ground up to the blade tip with the 
engine not running.

8050-117