Dixon 966985401 Benutzerhandbuch

MAIntenAnCe

39

1

2

3

In order to attain the best mowing effect, it is 
important that the blades are well sharpened and not 
damaged.

Bent or cracked blades or blades with large nicks 
should be replaced. 
Damaged blades should be replaced when hitting 
obstacles that result in a breakdown. Let the service 
workshop decide whether the blade can be repaired/
ground or must be replaced.
Balance the blades after sharpening.
Check the blade mounts.

Replacing Pump Belt
Park the mower on a level surface. Engage the 
parking brake.

 Remove the deck belt (see Deck Belt Removal 

1. 

in this section of the manual).

 Remove clutch stop to access the belt.

2. 

 Disconnect clutch wire.

3. 

 Create slack in the belt by removing the spring 

4. 

on the pump idler arm.

 The belt should now be able to be removed 

5. 

from the engine pulley and pump pulleys.

 Wrap the belt around the pulley

1. 

 Route the belt around the inside of the idler 

2. 

pulley.

 Wrap the belt around the engine pulley.

3. 

 Reattach the spring on the pump idler arm.

4. 

 Reconnect clutch wire.

5. 

 Replace and secure clutch stop.

6. 

 Reinstall the deck belt. (see Deck Belt Removal 

7. 

in this section of the manual).

8054-003

Electric clutch

1. 

Idler spring

2. 

Clutch stop

3. 
Pump belt removal