Dixon 361 Benutzerhandbuch

 

1. To start mower blades, pull up slightly on blade drive switch handle and move it forward to 

the "ON" position.

 

2.   To stop mower blades, move switch handle to the "OFF" position     

 

IMPORTANT -    PERFORM SAFETY CHECKS AFTER MAKING ANY REPAIRS OR ADJUSTMENTS

 

1.  After reassembly, while seated on mower, attempt to start engine with mower deck 

engaged. Engine should NOT   start. If engine does start, return the mower   to an Authorized 
Dixon dealer for adjustment or repair.

 

2.   Disengage mower deck and start engine. With the operator in the normal seated position, 

engage mower deck and remove weight from seat. The engine should stop. If the engine 
does NOT  stop when operator rises from seat, return the mo wer to an Authorized Dixon 
dealer for adjustment or repair.

 

3.   Engage, then disengage mower blade in each cutting height. Insure that blade disengages 

and comes to a stop within (5) seconds in each height position. If blade does 

disengage properly, contact your Authorized Dixon dealer.

 

CAUTION:    DO NOT OPERATE MOWER IF ANY SAFETY FEATURE IS NOT FUNCTIONING CORRECTLY 

 

Tighten nut on brake rod P/N2£33, located in front of the transaxle on each side, just 
enough to prevent brake from slipping when engaged.

 

CAUTION:  Over tightening may cause premature wear on the brake band P/N 5085.

 

Revised 2/93 
P / N 8 1 1 1