Dixon 966 004301 Benutzerhandbuch

9

ASSEMBLY

Using hardware provided in kit, attach support

1. 

mount to unit.
Attach hanger bracket to support mount. Do not

2. 

fully tighten nuts at this time.
Secure rear end of support straps to outside of 

3. 

Hanger Bracket

hanger assembly. Set reinforcement plates to the 

outside of the tank brackets and fasten front end

of support strap to tank bracket and reinforcment

plate with round head bolt. Secure front end 

of reinforcement plate to tank bracket with hex

bolt. Fully secure all mounting hardware. See 

illustration. 

NOTE: Depending on model, rear guard hole

Support Mount

Support Straps

Reinforcement Plate

Hex Bolt Placement

Round Head 

 Bolt Placement

Cover Assembly

Frame 

Bracket

Hanger

For ease of assembly, you may wish assistance from 

another person for mounting the cover assembly to 

mower.

Position cover assembly on the ground behind 

1. 

the mower.
Lift and rotate cover to align the frame bracket

2. 

with the hanger and slide the cover down until 

secure.

Remove plastic end cap from the center bag 

support arm. Fully insert spacer plugs into the 

ends of the support tube. It may be necessary 

to tap the spacer into place with a hammer or 

mallet. Replace the plastic end cap back over

the spacer. The additional extension will hold the 

hood more securely when latched.

Remove center 

end cap

Insert spacer and 

replace cap