Dixon 312 Benutzerhandbuch

To engage mower blades, turn engagement lever on floor slowly to the "ON" position. To 
Disengage mower blades, turn lever slowly to the "OFF" position.

• ' 

•

'

-

'

•

                                                         • ••' 

*                     

   1.    After reassembly, while seated on mower, attempt to start engine with mower deck  

engaged. Engine should not  start. If engine does start, return the mower to an Authorized 
Dixon dealer for adjustment or repair. 

2.   Disengage mower deck and start engine. With the operator In the normal seated position. , 

engage mower deck and remove weight from seat. The engine should stop. If the engine 

does not stop when operator rises from seat, return the mower to an Authorized Dixon 
dealer for adjustment or repair. 

3.  Engage then disengage mower blade in each cutting height. Insure that blade disengages 

and comes to a  stop within (5) seconds in each height position. If blade does  not 
disengage properly, contact your Authorized Dixon dealer.

Remove the body as described above. Tighten nut on brake rod P/N 2533 located In front of 
the transaxle on each side, just enough to prevent brake from slipping when engaged.

CAUTION: Over-tightening may cause premature wear on the brake band P/N 5085

Revised 2/93 
P/N 8114,