Dixon 966057501 Benutzerhandbuch
Safety System
The machine is equipped with a safety system that
prevents starting or driving under the following
conditions.
The engine can only be started when:
prevents starting or driving under the following
conditions.
The engine can only be started when:
The mower deck is disengaged.
1.
The steering controls are in the outer, locked
2.
neutral position.
The parking brake is on.
The parking brake is on.
3.
make daily inspections to ensure that the safety
system works by attempting to start the engine
when one of the conditions is not met. Change the
conditions and try again.
If the machine starts when one of these conditions
is not met, turn the machine off and repair the safety
system before using the machine again.
make sure the engine stops when the park brake
is not engaged and the operator leaves the seated
position.
Check that the engine stops if the mower blades are
engaged and the driver temporarily moves off the
drivers seat.
system works by attempting to start the engine
when one of the conditions is not met. Change the
conditions and try again.
If the machine starts when one of these conditions
is not met, turn the machine off and repair the safety
system before using the machine again.
make sure the engine stops when the park brake
is not engaged and the operator leaves the seated
position.
Check that the engine stops if the mower blades are
engaged and the driver temporarily moves off the
drivers seat.
IMPORTANT INFORMATION
In order to be able to drive, the driver must
sit in the seat and release the parking brake
before the steering controls can be moved into
the neutral position, otherwise the engine will
stop.
sit in the seat and release the parking brake
before the steering controls can be moved into
the neutral position, otherwise the engine will
stop.
8050-827
Conditions for starting
Fuel Filter
Replace the line-mounted fuel filter every 100 hours
(once per season) or more regularly if it is clogged.
Replace the filter as follows:
(once per season) or more regularly if it is clogged.
Replace the filter as follows:
move the hose clamps away from the filter.
1.
Use flat-nosed pliers.
Pull the filter loose from the hose ends.
Pull the filter loose from the hose ends.
2.
Push the new filter into the hose ends. Position
3.
the filter with the “flOW” arrow pointing up
toward the fuel pump. If necessary, a soap
solution can be applied to the filter ends to
ease mounting.
move the hose clamps back toward the filter.
toward the fuel pump. If necessary, a soap
solution can be applied to the filter ends to
ease mounting.
move the hose clamps back toward the filter.
4.
8011-468
Fuel filter
MaIntenanCe
37