Dixon GRIZZLY 52 Benutzerhandbuch
English
-
27
Start conditions
8011-527-1
Raise the mower deck
8011-552
OPERATION
Before Starting
•
Read the sections Safety Instructions and
Controls before starting the machine.
Controls before starting the machine.
•
Perform the daily maintenance before
starting (see Maintenance Schedule in the
Maintenance section).
starting (see Maintenance Schedule in the
Maintenance section).
•
Check that there is suffi cient fuel in the fuel
tank.
tank.
•
Adjust the seat to the desired position.
The following conditions must be fulfi lled before the
engine can be started:
engine can be started:
•
The driver must be seated on the seat.
•
The blade switch for engaging the mower
blades must be depressed.
blades must be depressed.
•
The parking brake must be on.
•
Both steering controls must be in the locked
(outer) neutral position.
(outer) neutral position.
Starting the Engine
1.
Sit on the seat.
2.
Raise the mower deck by pulling the lifting
lever backward to the locked position
(transport position).
lever backward to the locked position
(transport position).
3.
Activate the parking brake.
WARNING!
The seat belt must be used when
the roll bar is in upright position.
the roll bar is in upright position.
Roll bar in upright position
8011-464-1
Roll bar and safety belt
Operate the unit with the roll bar in the raised and
locked position and use the seat belt. There is no
rollover protection when the roll bar is down. If it is
necessary to lower roll bar, do not wear the seat belt.
Raise the roll bar as soon as clearance permits.
locked position and use the seat belt. There is no
rollover protection when the roll bar is down. If it is
necessary to lower roll bar, do not wear the seat belt.
Raise the roll bar as soon as clearance permits.