Dixon SZ4619 CA Benutzerhandbuch

OpERATION

30

Move throttle control to full throttle (not choke). 

7. 

The machine’s speed and direction are 
continuously variable using the two steering 
controls. When both controls are in the neutral 
position, the machine stands still. 
By moving both controls an equal amount 
forward or backward, the machine moves in a 
straight line forward or backward respectively. 
In order, for example, to turn right while 
moving forward, move the right control 
towards the neutral position. The rotation of the 
right wheel is reduced and the machine turns 
to the right. 
Turning on the spot can be achieved by 
moving one control backward (behind the 
neutral position) and carefully moving the 
other steering control forward from its neutral 
position.

Read the Safety Instructions Driving on Slopes in the 
Safety section.

The slowest speed possible should be used 

• 

before starting up or down hills.
Avoid stopping or changing speed on hills.

• 

If stopping is absolutely necessary, pull drive 

• 

levers into the neutral position and push to the 
outside of the unit and engage the parking 
brake.
To restart movement, release the parking 

• 

brake.
Pull the control levers back to the center of the 

• 

mower and press forward to regain forward 
motion.
Make all turns slowly.

• 

8050-921

8058-077