Dixon SZ4619 CA Benutzerhandbuch

mAINTENANCE

38

Visually check that no damage is found on the lever, 
linkages, or switch belonging to the parking brake. 
Perform a stand still test and check that there is a 
braking action.
To adjust the parking brake, contact the Dixon service 
workshop.

8058-092

Replacing EZT (E-Series Zeroturn Transaxle) belt
Park the mower on a level surface. Engage the 
parking brake.

EZT Belt Removal
NOTE: To maintain efficient cooling and not damage 
the EZTs, be careful of the fan blades when servicing 
the belt.

Remove the deck belt (see 

• 

Deck Belt Removal 

in this section of the manual).
Create slack in the belt by removing the spring 

• 

on the pump idler arm.
The belt should now be able to be removed 

• 

from the engine pulley and EZT pulleys.

Wrap the EZT belt around the EZT pulleys

• 

Route the belt around the inside of the idler 

• 

pulley.
Wrap the belt around the engine pulley.

• 

Reattach the spring on the pump idler arm.

• 

Install clutch onto engine shaft (pulley side 

• 

down), making sure key is installed. Align 
the clutch anti-rotation tab into slot on clutch. 
Secure clutch, install wire.
Reinstall the deck belt onto the electric clutch 

• 

(see Deck Belt Removal in this section of the 
manual).