Dixon 115312327R1 Benutzerhandbuch

oPeRAtIon

30

Observe and flag rocks and other fixed objects to 

• 

avoid collisions.
Begin with a high cutting height and reduce it until 

• 

the desired mowing result is attained. 
The average lawn should be cut to 
2½" (64 mm) during the cool season and over 3" 
(76 mm) during the hot months. For healthier and 
better looking lawns, mow often after moderate 
growth. 
For best cutting performance, grass over 6" (15 
cm) in height should be mowed twice. Make the 
first cut relatively high, the second to the desired 
height.
The mowing result will be best with a high engine 

• 

speed (the blades rotate rapidly) and low speed 
(the rider moves slowly). If the grass is not 
too long and dense, the driving speed can be 
increased without negatively affecting the mowing 
result.
The finest lawns are obtained by mowing often. 

• 

The lawn becomes more even and the grass 
clippings more evenly distributed over the mown 
area. The total time taken is not increased as a 
higher operating speed can be used without poor 
mowing results.
Avoid mowing wet lawns. The mowing result is 

• 

poorer because the wheels sink into the soft lawn, 
clumps build, and the grass clippings fasten 
under the cowling.
Hose the mower deck underside with water after 

• 

each use. When cleaning, the mower deck shall 
be raised into the transport position. Make sure 
the mower is cooled and the engine is off.
Use compressed air to clean top surface of the 

• 

deck. Avoid flooding water on top surface, engine 
and electrical components.
When the mulching kit is used, it is important that 

• 

the mowing interval is frequent.

8011-603