DeVillbiss Air Power Company A20116 Benutzerhandbuch

Seite von 60
14- ENG 
A20116
Risk of unsafe 
operation. If engine 
does not start after two pulls, 
squeeze trigger of gun to relieve 
pump pressure. Pull starter cord 
slowly until resistance is felt. Then 
pull cord rapidly to avoid kickback 
and prevent hand or arm injury.
11. Depress trigger on gun to start 
water fl ow. 
Risk of unsafe 
operation. Stand on 
a stable surface and grip gun/spray 
wand fi rmly with both hands. Expect 
the gun to kick when triggered.
12. Release trigger to stop water 
fl ow.
Risk of injury from 
spray. Always 
engage the trigger lock when gun 
is not in use. Failure to do so could 
cause accidental spraying.
Trigger Lock Engaged
13.  Adjust nozzle spray for the task 
being performed. See How To Use 
Wand instructions in this section.
SHUTTING DOWN
1. 
After each use, if you have applied 
chemicals, place chemical hose 
into container of clean water and 
draw clean water through chemical 
injection system to rinse system 
thoroughly. 
Risk of property 
damage. Failure 
to do so could cause damage to the 
pump. 
2. 
Turn engine off. See Engine 
Owner’s Manual. 
Risk of property 
damage.  NEVER 
turn the water off with the engine 
running.
3. 
Turn water source off.
4. 
Pull trigger on spray gun to relieve 
any water pressure in hose or spray 
gun.
5. 
See Storage section in this manual 
for proper storage procedures.