Casablanca Fan Company 84GxxD Benutzerhandbuch
4
CAUTION: To reduce the risk of
personal injury, use only the
mounting hardware provided with
the approved outlet box to install
the crossbar mounting bracket.
CROSSBAR MOUNTING BRACKET INSTALLATION
CEILING
WIRING
CROSSBAR
MOUNTING
BRACKET
FLAT
WASHER
GREEN
GROUND
WIRE
CEILING FAN
APPROVED
WIRING BOX
RIDGE
SIDE
DOWN
CANOPY INSTALLATION
CANOPY LOCK
WASHER
CANOPY
SCREW
CROSSBAR
MOUNTING
BRACKET
CANOPY
FOR FAN INSTALLATION OUTSIDE THE
USA GO TO PAGE 8
EXCLUDING MODELS ENDING IN ‘E’
CANOPY HARDWARE
CANOPY
CANOPY
HATCH
CANOPY LOCK WASHER (4)
CANOPY SCREW (4)
APPROVED
OUTLET
BOX
HARDWARE
NOTE: On sloped ceilings, align the
canopy opening towards the top or
room peak.
canopy opening towards the top or
room peak.
Proceed with installation as follows:
Step 1. Route the wires from the ceiling outlet box through
the crossbar mounting bracket center hole. Attach the bracket,
with ground wire and ridges down, to the ceiling fixture outlet
box with the mounting hardware included with the outlet
box.
the crossbar mounting bracket center hole. Attach the bracket,
with ground wire and ridges down, to the ceiling fixture outlet
box with the mounting hardware included with the outlet
box.
Tighten the screws firmly by hand only, being careful not to
bend the bracket by over tightening.
bend the bracket by over tightening.
Step 2. Attach the canopy to the crossbar
mounting bracket with three of the 8-32 x 2
mounting bracket with three of the 8-32 x 2
1
/
4
"
long canopy screws and canopy lock washers.
Tighten the screw firmly by hand only.
Tighten the screw firmly by hand only.
FOUR SEASONS
™
III