American Standard 4834.SWTS Benutzerhandbuch

 

A m e r i c a n   S t a n d a r d   I n c .   2 0 0 4

C

7 5 2 7 7 0 - 1 0 0   R e v .   B

7 5 2 7 7 0 - 1 0 0   R e v .   B

Certified to comply with ANSI Z124.1; 
Z-124-2; Z-124.3. Observe all local 
plumbing and building codes.

Unpack your new shower walls and inspect them carefully for damage. Verify that the walls are the correct size for your 
installation. Save the shipping carton to use as a template. Refer to American Standard roughing-in information for 
specific dimensions for each model.

Corian

® 

solid surface shower walls can be installed on water-proof drywall, plaster, Wonderboard

®

, or marine-grade 

plywood. Regular drywall is not recommended.

NOTE   Take extra care in handling the front surfaces of the walls. Use only non-abrasive cloths to avoid scratching.

•  Carbide Drill & Hole 
    Saw or Sabre Saw
•  Tape Measure
•  Caulking Gun
•  Razor (Utility) Knife
•  Grease Pencil

•  Masking Tape
•  Hot-Melt Glue Gun (optional)
•  Level
•  Denatured Alcohol 
   Solvent

1.  Remove any loose pieces of wall surface and repair to make a flat, plumb and square surface.
2.  Clean the surface with 

denatured alcohol to insure good panel bonding.

3.  Prime or water seal raw plaster, wallboard or spackling prior to installation.

•  4 Tubes Clear Silicone Caulking For Shower
   or 5 Tubes Clear Silicone Caulking For Bath
•  Hot Melt Glue and/or props and/or braces
 

CORIAN® is a registered trademark of the DuPont Corporation.

1

FOR TOLL FREE INFORMATION AND ANSWERS TO YOUR QUESTIONS, CALL:

1 (800) 442-1902, in Canada call 1 (800) 387-0369.

Weekdays 8:00 a.m. to 4:00 p.m. Eastern time.

4834.SWTS, 3636.SWTS, 3838.CWTS, 6042.BWTS

3232.LSW, 3636.LSW, 4242.LSW, 4834.LSW, 6034.LSW 
3636.LCW, 3838.LCW, 4242.LCW, 6060.LCW
6030.LBW, 6032.LBW, 7236.LBW