American Standard T028.990 Merkblatt

Seite von 2
DAZZLE DIVERTER & PERSONAL
SHOWER TRIM KITS
DECK MOUNT
TUB FILLERS
Installation
Instructions
T028.990
Certified to comply with ANSI A112.18.1
U.S. Patent No. D403,750
1
INSTALL HANDLE ADAPTER
Remove DIVERTER GUARD (1) from valve.
Place the ESCUTCHEON SEAL (7) into groove of DECK ADAPTER (2).
Align the HANDLE STEM (3) with the SLEEVE (4) as necessary.
Thread the HANDLE ADAPTER (5) into the VALVE BODY (6) until
the DECK ADAPTER (2) contacts tight against the finished
mounting surface.
GROOVE
7
6
5
4
2
3
1
1
4
2
5
3
TOP
Figure "A"
SPLINE END DOWN
THREAD ON
TO DECK
ADAPTER
2
INSTALL HANDLES
Turn VALVE STEM (2) fully clockwise (Tub fill position).
Push ADAPTER (1) on VALVE STEM (2), so that the hole of the
ADAPTER (1) without a spline is facing up. See figure "A". Tighten
STEM SCREW (3) to secure ADAPTER (1). 
Find correct position of LEVER HANDLE ASSEMBLY (4) by adjusting
male teeth on ADAPTER (1) to female teeth in HANDLE (4).
Thread LEVER HANDLE ASSEMBLY (4) onto DECK ADAPTER (5) until
snug against mounting surface.
M 9 6 8 4 9 9   R e v.   1 . 1
with 
EverClean™ Finish
Congratulations on purchasing your American Standard
faucet with EverClean finish  found only on American
Standard faucets.
To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.
EverClean Finish
•  One wipe effortlessly removes spots
•  Eliminates the need for cleaners and scrubbing
•  Permanent surface protectant remains beautiful
   for the life of the faucet
•  EverClean™ available on:  Polished Chrome, Satin Nickel,
   Stainless Steel, Polished Brass (or any combination of these finishes)