American Standard 3636.SWTS Benutzerhandbuch

After the adhesive is set, remove the shim and caulk the exposed seams with silicone sealant. Exposed seams must be 
caulked with a clear or matching silicone sealant. The freshened caulked lines can be smoothed and excess sealant 
removed by running a clean, damp cloth along the seams.

Apply trim (if any) and accesories (soap dish, etc.) with clear or matching silicone sealants and prop into place until the 
sealant sets.

7 5 2 7 7 0 - 1 0 0   R e v .   B

Clean up of silicone sealants or mastics, should follow manufacturer's recommendation. For daily care and cleaning, 
refer to the American Standard maintenance label provided with the Corian® solid product shower walls. Always 
provide adequate ventilation while working.

American-Standard, 

2480 Stanfield Road

Mississauga, Ontario 

Canada L4Y 1S2

Toll Free:  (800) 387-0369

American Standard Inc.,

P.O. Box 6820

Piscataway, New Jersey 08855

Attention: Director of  Consumer Affairs

For residents of the United States,

warranty information may also be

obtained by calling the following

toll free number: (800) 442-1902

In Mexico: 

Customer Service Manager

Ideal Standard, S.A. de C.V.

Via Morelos #330

Col. Santa Clara

Ecatepec 55540 Edo. Mexico

If, within ten years after its initial purchase, inspection of the        Corian portion of this American Standard 
product, confirms that it is defective in materials or workmanship, American Standard will repair or, at its option, 
exchange the product for a similar model or refund the purchase price.
  This warranty applies only to the original purchaser and installation of these products.  All labor and 
transportation costs or charges incidental to warranty service are to be borne by the original consumer-
purchaser.
  This limited warranty does not apply to local building code compliance.  Since local building codes vary 
considerably, the purchaser of this product should check with a local building or plumbing contractor to insure 
local code compliance before installation.
  This warranty shall be void if the product has been fabricated or modified in a manner inconsistent with the 
product as shipped by American-Standard; moved from its initial place of installation; if it has been subjected to 
faulty maintenance, abuse, misuse, accident or other damages; or if it was not installed in accordance with 
American Standard's instructions.

  American Standard's option to repair or exchange the product under this warranty does not cover any labor or 

other costs of removal or installation, nor shall American Standard be responsible for any other incidental 
or consequential damages attributable to a product defect or to the repair or exchange of a defective 
product, all of which are expressly excluded from this warranty. (Some states or provinces do not allow the 
exclusion or limitation of implied warranties, so this exclusion may not apply to you.)

 This warranty gives you specific legal rights. You may have other statutory rights that vary from state to 

state of from province to province, in which case this warranty does not affect such statutory rights.