Ariens Deluxe 24 Benutzerhandbuch
GB - 31
•
If roller is more that 7/8 in. (22.2 mm)
from frame, loosen idler adjustment
nut and move idler away from the belt,
tighten adjustment nut and recheck
roller clearance.
from frame, loosen idler adjustment
nut and move idler away from the belt,
tighten adjustment nut and recheck
roller clearance.
1. Check the attachment clutch cable
spring extension.
Measure the length of the attachment
clutch cable spring with the clutch lever
disengaged.
Measure the length of the attachment
clutch cable spring with the clutch lever
disengaged.
•
If spring extension is within the
specified range, go to Check
Attachment Brake on page 32.
specified range, go to Check
Attachment Brake on page 32.
•
If spring extension is outside of
specified range, go to step 2.
specified range, go to step 2.
2. Adjust cable length (Figure 39).
a. Loosen jam nut on cable.
b. To increase spring extension
b. To increase spring extension
adjust barrel down the cable and
tighten jam nut.
tighten jam nut.
c. To decrease spring extension
adjust barrel up the cable and
tighten jam nut.
tighten jam nut.
Figure 37
OS7189
Roller should be 1/2 – 7/8 in.
(12.7 – 22.2 mm) from the frame when
the attachment clutch is engaged.
(12.7 – 22.2 mm) from the frame when
the attachment clutch is engaged.
Figure 38
OS7183
OS7184
1/2 – 9/16 in.
(12.7 –- 14.3 mm)
(12.7 –- 14.3 mm)
Figure 39
OS7221
1. Engine Sheave
2. Attachment Drive Belts
3. Belt Finger
4. Attachment Belt Idler
5. Attachment Idler Adjustment Nut
2. Attachment Drive Belts
3. Belt Finger
4. Attachment Belt Idler
5. Attachment Idler Adjustment Nut
OS7194